“Z” Bigfoot Mount Set

This z brackets mount set is designed for use with our AMS Essential kits or any solar panel with mounting holes in the frame. This mount set will not allow for tilting. Made from corrosion-resistant stainless steel.

1. Clean the surface you are mounting on with 91% isopropyl alcohol.
2. Set the panel with mounts on the roof and position.
3. Lift the panel and peel the tape cover off of each mount foot.
4. Place the sticky panel back on the roof in the same exact position.
5. Check that each foot is flat against the roof. Loosen bolts to make adjustments if necessary.
6. Apply the sealant by completely burying the mount foot.
7. If you have T-Knobs, it is best to check that they are tight before going on a trip.

91M-ZBF – “Z” Bigfoot Mount Set

91M-ZBZ -“Z” Bigfoot Mount Set for Zamp Panels

Extension Beyond Panel Edge (per side)

Rocker Mounts
91M-35MA
1-1/4”

”Z” Bigfoot Mount Set
91M-ZBF
0”, 1-1/8”

Elevation Above Surface
Rocker Mounts
L Foot – 3 Hole (Standard)MOUNTTL-3
1-1/8”, 1-1/2”, 1-7/8”

L Foot – 5 Hole
MOUNTTL-5
1-1/8”, 1-1/2”, 1-7/8”, 2-1/4”, 2-5/8”

L Foot – Tall 3 Hole
MOUNTTL-T3
3”, 3-3/8”, 3-3/4”

”Z” Bigfoot Mount Set
91M-ZBF
1-1/2”

AM Solar Part Number: 91M-ZBF, 91M-ZBZ