Cables & Connectors


Battery & Inverter Interconnect

Cable-4/0
9.00

Typically used between the battery bank and a 2000W or larger inverter

Sold by the foot

Quantity:
Add To Cart
Cable-2/0
6.00

Typically used between batteries or between a battery bank and a 1000W inverter.

Sold by the foot

Quantity:
Add To Cart
 
 

Roof C-Box to Charge Controller

Duplex-2/2
6.50

Typically used between a combiner box and a charge controller in 40A (or 600W) or larger systems.

Sold by the foot

Quantity:
Add To Cart
Duplex-4/2
5.00

Typically used between a combiner box and a charge controller in 30A-40A (or 400W-600W) systems

Sold by the foot

Quantity:
Add To Cart
Duplex-6/2
3.50

Typically used between a combiner box and a charge controller in 25A-35A (or 300W-500W) systems

Sold by the foot

Quantity:
Add To Cart
Duplex-8/2
2.00

Typically used between a combiner box and a charge controller in 30A (or 400W) or smaller systems

Sold by the foot

Quantity:
Add To Cart
Duplex-10/2 600V Cable
2.00

Typically used between series connected solar panels and a charge controller.

Quantity:
Add To Cart
 
 
 

Roof & Solar Panel

Roof Wire - AMS Custom 10ga Duplex
3.00

Custom designed for AM Solar with a UV resistant jacket and a round profile that creates a tight seal through a liquid tight strain relief, this cable goes from solar panels to the combiner box.

Sold by the foot

Quantity:
Add To Cart
10ga USE-2 Black & White Wire
1.60

Used to make MC4 extension cable from solar panels to a combiner box or charge controller.

Sold as two cables (black & white) by the foot

Quantity:
Add To Cart
 
 

Sensor

Duplex-18/2
0.60

Typically used a signal wire between a shunt and monitor.

Sold by the foot

Quantity:
Add To Cart
 
 
 

Inverter Input

Stranded-10/3
2.50

Typically used between main or sub panels and an inverter in systems designed for 30A service

Sold by the foot

Quantity:
Add To Cart
Stranded-6/3
4.25

Typically used between main or sub panels and an inverter in systems designed for 50A service

Sold by the foot

Quantity:
Add To Cart
 
 

Lugs

2/0 Lug 3/8"
2.00

For use with 2/0 cable on 3/8" posts

Quantity:
Add To Cart

MC4 Connectors

4/0 Lug 3/8"
3.00

For use with 2/0 cable on 3/8" posts

Quantity:
Add To Cart
 
 
MC4 Pigtail Connector Kit
7.00

Add MC4 connectors with a simple butt splice and heat shrink.

Quantity:
Add To Cart
MC4 Crimp-on Connector Set
8.00

Crimp-on MC4 connector set (male & female) for 10ga. cable.  Requires special crimp MC4 crimping tool.

Quantity:
Add To Cart
MC4 T-Branch Connectors
30.00

This connector set combines the MC4 cable outputs of two solar panels in parallel.

Quantity:
Add To Cart
 

Portable Panel Connectors

Extension Cord Plug for Panel (Male)
23.00

The heavy duty design and locking connection make this plug ideal for splicing onto the leads of a portable panel system.  Only mates with Wall Mount Receptacle for Portable Panels (Female)

Quantity:
Add To Cart
Wall Mount Receptacle for Portable Panels (Female)
25.00

The heavy duty design and locking connection make this receptacle ideal for mounting to the outside of a vehicle for connecting to a portable panel system.  Only mates with Extension Cord Plug for Panel (Male)

Quantity:
Add To Cart
 
 

Zamp Compatible

Zamp 2 Pole Plug, PV Side
9.00

Splice this connector onto solar panel leads or the AM Solar roof cable.  The connector is compatible with Zamp pre-wire systems.

Quantity:
Add To Cart
Zamp 2 Pole Plug, Roof/Wall
10.00

Ideal for adding a mobile panel.  This port attached to the external wall or roof of an RV and is compatible with Zamp connectors.

Quantity:
Add To Cart
Zamp 2 Pole Plug, Battery Side
9.00

Splice this connector onto the battery side of factory pre-wire leads or the AM Solar roof cable.  The connector is compatible with Zamp equipment.

Quantity:
Add To Cart
 

Heat Shrink Tubing

Heat Shrink Red 1.5" x 3/4"
1.50

Used to clean up and mark 2/0 or 4/0 positive cable ends

Quantity:
Add To Cart
Heat Shrink Black 1.5" x 3/4"
1.50

Used to clean up and mark 2/0 or 4/0 negative cable ends

Quantity:
Add To Cart
 
 

Miscellaneous:

Wire Nut Kit
5.00

This kit is used when connecting the AC cables in a Magnum inverter system.

Quantity:
Add To Cart
Butt Splices
from 0.50

Crimp on butt splices

Gauge:
Quantity:
Add To Cart
Junction Post Kit Positive
10.00

This post kit provides a clean way to combine multiple positive cables to a 3/8" lug.

Quantity:
Add To Cart
Junction Post Kit Negative
10.00

This post kit provides a clean way to combine multiple negative cables to a 3/8" lug.

Quantity:
Add To Cart