Solar Charge Controller Kits

Victron MPPT Solar Charge Controller Kits

The System Core is what takes power from the roof mounted combiner box and feeds it into your battery bank. The essential components of a System Core include a wire harness, charge controller and circuit protection. Victron MPPT System Cores are ideal for lithium battery banks, offering a wide variety of add-on monitoring options and allow for series connected solar panels. Neither a cell phone signal nor an internet connection are needed for Bluetooth communication.

Ideal for lithium battery banks, offering a wide variety of add-on monitoring options, allows for series connected solar panels

  • Victron 15A Solar Charge Controller Kit (Aprox. 200W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 75|15 charge controller and comes with built-in bluetooth monitoring that can communicate with a smart phone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 200 watts of...

    Quantity:
  • Victron 20A Solar Charge Controller Kit (Aprox. 300W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 100|20 charge controller and comes with built-in bluetooth monitoring that can communicate with a smart phone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 300 watts of...

    Quantity:
  • Victron 30A Solar Charge Controller Kit (Aprox. 450W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 100|30 charge controller and comes with built-in bluetooth monitoring that can communicate with a smart phone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 450 watts  of solar panels...

    Quantity:
  • Victron 50A Solar Charge Controller Kit (Aprox. 700W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 100|50 charge controller and comes with built-in Bluetooth monitoring that can communicate with a smart phone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 700 watts  of...

    Quantity:
  • Victron 70A Solar Charge Controller Kit Aprox 900W 12V

    Victron 70A Solar Charge Controller Kit (Aprox. 900W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 150|70 charge controller and comes with built-in Bluetooth monitoring that can communicate with a smartphone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 900 watts of solar panels...

    Quantity:
  • Victron 85A Solar Charge Controller Kit (Aprox. 1250W @ 12V)

    This kit is built around a Victron SmartSolar MPPT 150|85 charge controller and comes with built-in bluetooth monitoring that can communicate with a smart phone.  It is also compatible with several optional add-on monitoring kits.  It can regulate up to 1250 watts  of...

    Quantity:

SunRunner™ Signature System Cores

Deluxe system cores with MPPT charge controllers, temperature compensation and remote meters with full programability

  • SunRunner Signature 25MPPT 6 PRO Core

    SunRunner Signature 25MPPT/6/PRO Core

    This kit is built around an MPPT charge controller and offers a digital display, system programming, battery monitoring, temperature compensation, disconnects and cable management hardware.  It can regulate up to 340W of solar panels and is compatible with our roof mounted combiner boxes.  Thick...

    Out of stock

  • SunRunner Signature 40MPPT

    SunRunner Signature 40MPPT/4/Pro Core

    This kit is built around an MPPT charge controller and offers a digital display, system programming, battery monitoring, temperature compensation, disconnects and cable management hardware.  It can regulate up to 540W of solar panels and is compatible with our roof mounted combiner boxes.  Thick...

    Out of stock

SunRunner™ Gold System Cores

Upgraded with temperature sensors to optimize battery charging, designed for multiple panel systems using combiner boxes

  • SunRunner Gold 30PWM 8 System Core

    SunRunner Gold 30PWM/8 System Core

    This kit offers a digital display, temperature compensation and cable management hardware.  It can regulate up to 450 watts of solar panels and is compatible with our roof mounted combiner boxes.  Thicker 8 gauge wire and a Maxi Fuse minimize voltage drop for...

    Out of stock

  • SunRunner Gold 30MPPT 8 System Core

    SunRunner Gold 30MPPT/8 System Core

    This kit is built around an MPPT charge controller and offers a digital display, temperature compensation and cable management hardware.  It can regulate up to 400W of solar panels and is compatible with our roof mounted combiner boxes.  Thicker 8 gauge wire and a...

    Out of stock

SunRunner™ Essential System Cores

Low price, PWM Charge Controllers with wire harnesses designed to connect directly to solar panels with MC4 leads

  • SunRunner Essential 10PWM 10 System Core

    SunRunner Essential 10PWM/10 System Core

    This kit has a digital display and can regulate up to 165 watts of solar panels whose output cables terminate in MC4 connectors.  Use MC4 T-Branch connectors or AMS Essential Add-On MC4 Wire Harness when adding more than one panel to this system.

    Out of stock

  • SunRunner Essential 20PWM/10 System Core

    SunRunner Essential 20PWM/10 System Core

    This simple arrangement allows you to use 32 or 36 cell Solar Panels whose output cables terminate in MC4 connectors. The controller can regulate up to 315 watts of Solar Panels.  Use MC4 T-Branch connectors or AMS Essential Add-On MC4 Wire Harness when...

    Out of stock

The name of each Charge Controller Kit consists of a number representing the maximum current rating, “PWM” or “MPPT” referencing the type of charge controller used, and a forward slash followed by a number representing the wire gauge.  Therefore, a SunRunner 30PWM/10 system uses a 30 amp PWM charge controller with a system wiring harness that uses 10 gauge cable between the roof combiner box and the controller and also between the controller and the batteries. Likewise, a SunRunner 40MPPT/4 would be based on a 40 amp MPPT controller that uses 4 gauge cable for increased efficiency and lower voltage drop at higher currents.

Our SunRunner System designs are the result of over 30 years of hands-on experience gained from selling, installing and living with these systems. We are constantly improving our designs and component offerings based on customer feedback and personal experience. If we can’t find products to meet our needs, we task ourselves to build (or have built) a product to our specifications. Because of that, our systems are unique in the field. We have thousands of satisfied customers who are living, loving and playing in their RVs which are powered by AM Solar SunRunner Systems.

Feel free to call or email our Tech Support at 541.726.1091 if you need help selecting the SunRunner System that best matches your needs.

  • Temperature Sensor for BMV-712

    Support from AMSolar is definitely 5 stars. 1st line of support for Victron equipment provided through distributors. AMSolar likely one of the best when it comes to RVs.

    Tom B

  • Zamp 2 Pole Plug, PV Side

    AM Solar is my “go to” website and store for all my solar needs. They provide technical advice to help ensure you are choosing the correct components. Their parts and connectors are high quality and come with heat shrink cabling to ensure a water tight connection.

    Bryan S

  • Liquid Tight Strain Relief for 10/2 cable

    Tight fit on the cables (my 10 AWG cables have extra thick insulation so it was harder to get the wire in but it did work!

    Bob S

  • VE SmartSolar MPPT 150/85-Tr VE.Can

    Hands down the best source for your RV solar needs. From the very knowledgeable CSR who answered the phone to the solar technician. They reviewed my current system then gave recommendations for improvements.

    Ken I

  • Zamp ATP Prep Kit – Male

    This is a nice kit to have. Everything needed to attach your panel to the zamp box. Very slick. Highly recommend.

    Steve S

  • AM Solar Roof Combiner Box (C-Box)

    Well layed out and easy access for running wires inside. The top of the box has a seal and overlays the bottom half giving good moisture control. This new version is greatly improved.

    Pamela D

  • Dicor Sealant

    I visit a lot of industrial manufacturing and assembly facilities in my job as an environmental engineer. Sometimes it evident that a facility has an organized mind at work setting things up. I get that feeling with AM Solar. Keep up the good work guys.

    Dan M

  • Dicor Sealant

    I enjoy doing business with AM Solar. All the employees have been there a long time. They know and use the products the sell. They are knowledgeable and very helpful. They are the first company I turn to for my Airstream solar needs.

    Keith W

  • VHB Tape, two 5″ Strips

    I enjoy doing business with AM Solar. All the employees have been there a long time. They know and use the products the sell. They are knowledgable and very helpful. They are the first company I turn to for my Airstream solar needs.

    Keith W

  • TEROSON MS 5510 Sealant (legacy)

    This is the 2nd large order I have made from AM Solar. They are absolutely the best. Garret went above and beyond helping me, a do it yourselfer, know what I needed to buy. The kits are especially helpful with all the small accessories.

    Scott M

  • TEROSON MS 5510 Sealant (legacy)

    I enjoy doing business with AM Solar. All the employees have been there a long time. They know and use the products the sell. They are knowledgeable and very helpful. They are the first company I turn to for my Airstream solar needs.

    Keith W

  • Roof Wire Harness Acc. Kit

    I enjoy doing business with AM Solar. All the employees have been there a long time. They know and use the products the sell. They are knowledgeable and very helpful. They are the first company I turn to for my Airstream solar needs.

    Keith W