Mini Mansion 2720W 1200AhAGM 3000VA

Tiny Signature.png
Tiny Signature.png

Mini Mansion 2720W 1200AhAGM 3000VA

15,900.00

- 16x 170W Solar Panels with mounts and wire harnesses
- Mounts for asphalt shingle roof included
- Dual 100A Victron SmartSolar MPPT Charge Controller with Bluetooth Communication
- Victron BMV-712 Battery Monitor with Bluetooth Communication and Color Control GX Monitor for full animated full system monitoring
- 6x Lifeline 400Ah AGM 6V Batteries
- 3000W Victron Multiplus pure sine inverter / 120A charger with hybrid 30A generator connection
- 60A DC Battery Protect with remote disconnect prevents over discharge
- 6 position DC fuse block with DC outlet offering dual USB and standard 12V
- Lugs, heat shrink, cables, etc. All included

Quantity:
Add To Cart

This power system includes all the critical components to power an off-grid lifestyle.  Two different charging sources (solar and generator) can charge a sealed AGM battery bank.  This system can easily power LEDs, fans and cell phone chargers with DC, and on the AC side, generator power can go directly to the outlets when in use or power can be inverted from the battery bank to cover loads like a blender, microwave or even air conditioner. (gasoline generator not included)

What you get:

  • All the components needed to make a complete system
  • Installation manual with a full bill of materials
  • Connection diagrams detailing the entire system
  • AM Solar phone, email and Facetime support

Upgrade or Modification Options:

This complete kit is composed of four subsystems:  Solar Charging, Battery Bank/Monitoring, AC Input/Output & DC Distribution.  These subsystems can be removed or modified based on what you already have or want.

Solar

Changing the Panels:  The dual charge controllers can support a maximum of 2800W, so only two 40W panels can be added.  But, you may consider removing one or all of your 170W panels and adding other panels with a total wattage of 1400W or less per controller. 

Change the Charge Controller:  The current charge controller core is rated for two 100A systems and uses 2ga cable.  If you plan to use less solar wattage, a single controller or smaller controllers like the 15A, 30A, 50A, 70A or 85A might be more economical.  Or, if you want more than 2800W, you can add another charge controller with a third parallel array.

External Port:  A charging port can be added that would allow for the use of folding panels as long as the charge controller can handle the extra wattage.

Battery Bank

Different AGM Batteries:  The standard configuration comes with six 6V 400Ah AGM batteries.  If you might consider a 24V or 48V system which would require a different inverter/charger.  Or, go smaller with 2 or 4 batteries or use smaller 220Ah or 300Ah batteries.  All batteries need to be the same make, model, and age.

Lithium Batteries:  If space constraints are more restrictive than budget constraints, you can add up to four Lithium Battery Add-on kits to the Lithium Base Kit as long as all the kits have the same amp-hour rating.

AC and DC Distribution

More DC Outlets:  The standard configuration comes with a 6 position fuse block.  We have a 12 position block available.  You can also get more outlets.

More AC Outlets:  We include one AC outlet.  If you need more, you can add them to the same breaker or other breakers in the sub panel.

Different Breakers:  The standard configuration includes three duplex breakers 30/15, 20/15 & 15/15.  There are many options.

Inverter/Charger System

Simplify the Inverter:  If you don’t need the full 3000VA or a charger, you may be interested in one of our smaller stand alone inverter kits like the 250VA, 500VA, 800VA, or 1200VA.  With these kits you also have the option of adding a shore power charger like a Progressive Dynamics 45A or 60A model or a clip on 7A charger.  Also, the Multiplus 2000VA has a slightly different profile and is still capable of running a microwave, blender or coffee maker, but we don't recommend it for air conditioners.

Monitoring

Simplify the Display:  The current configuration uses a Victron Color Control GX Monitor to show complete system status on a single animated display.  This can be removed and all system data can be accessed with a smartphone using Bluetooth.

Plan your build with these components:

ZS170 Solar Panel Kit with Rocker Mounts

Using 6" monocrystalline cells, this panel is ideal for large systems where there is ample roof space.  Made in Bend, Oregon, United States Flash tested at 184W +/- 3%

Wattage:  170W
Type:  Monocrystalline
Operating Voltage:  18.00V
Size:  58.3" x 26.4" x 1.38"
Frame:  Silver Anodized Aluminum
Connection Type:  Terminal Block
Mount:  Tilting (with optional tilt bars)
Mounted Dimensions:  60.6" x 26.4" x 2.6"

Roof C-Box

This C-box is for efficiently combining solar panel output cables and sealing off a roof penetration. Its rugged and spacious design make installation and trouble shooting very easy.

Dimensions: H 1.9" x W 5.3" x D 7.4"

SmartSolar MPPT 150/100-Tr (100A) Charge Controller

Using the latest, fastest technology, SmartSolar charge controllers maximize energy-harvest by driving current intelligently to achieve a full charge in the shortest possible time. SmartSolar charge controllers offer easy programing of charging profiles to match all battery chemistries using the VictronConnect Bluetooth app.

Type: 
 MPPT
Current Rating:  100A
Maximum Wattage:  1400W
Temp Sense:  Ambient
Display:  MPPT Control, Color Control, Built-in BlueTooth, Pluggable Display
Programming:  Preset Options

DC Breakers

Because of Direct Current's tendency to arc when disconnected, special breakers are needed.  These DC breakers are ideally used between charge controllers and battery banks and on alternator or small inverter lines.

Dimensions: H 1.8" x W 2.3" x D 3.5"

Battery Monitor BMV-712

The BMV-712 is Victron's newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery.  Compatible with all battery types.  Built-in Bluetooth.

Monitor Dimensions: H 1.3" x W 2.4" x D 2.4"
Shunt Dimensions: H 1.4" x W 4.8" x D 1.6"

Lifeline GPL-L16

NOT AVAILABLE ONLINE
AGM battery
6 Volt nominal
400Ah capacity @ 20hr
Weight = 119lbs
Dimensions: H 17.7" x W 7.0" x D 11.6"

Color Control GX Monitor

The Color Control GX provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and even more.

Dimensions: H 1.2" x W 4.7" x D 5.2"

Sub Panel Surface Mount

Breaker box for AC distribution, Rated for 40A

Dimensions: H 3.4" x W 5.0" x D 8.6"

MultiPlus C 12/2000/80-50 - 120V Inverter/Charger

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Rated at 2000VA.

Dimensions: H 5.0" x W 9.9" x D 20.7"

Battery Protect 12/24V-65A

Protect your batteries from accidental excessive discharge by installing a BP65 between your battery positive and DC distribution buss or fuse box.  For loads under 65A.

Dimensions: H 1.9” x W 4.2” x D 1.9”

ST Fuse Block 6 Circuit

Compact ATO/ATC fuse block consolidates branch circuits and eliminates the tangle of in-line fuses for electronics and other appliances.

Dimensions: H 4.9" x W 3.4" x D 1.5"

12V with USB DC Outlet

Standard 12V outlet with dual USB

Dimensions: H 4.1" x W 1.8" x D 2.1"

12V Wall Mount Switch

Ideal for small inverter ON/OFF or disconnecting DC loads

Dimensions: H 1.5" x W 1.6" x D 2.6"

 
 
 
 

AM Solar Part Number:  99-TNYSIG