Victron IP65 SmartShunt Battery Monitor




  • Shunt Dimensions: H 1.8" x W 4.8" x D 2.1"
  • Product Description

    This battery monitor measures voltage, current, capacity, and temperature. It can work with any battery type. Built-in Bluetooth. It is compatible with the Color Control Monitor or Cerbo. This water resistant IP65 version of the Smart Shunt is great for non-weatherized applications such as step bays, tongue boxes, under chassis, and marine applications.

    The IP65 SmartShunt is best used in vans and small trailers where the distance between the IP65 SmartShunt to the Smart device (phone, tablet, laptop) is no more than about 10’, 15′ at most.  It’s also a good choice when connected to a Victron GX monitor (Color Control or Cerbo) since the Bluetooth connection will not be as critical.

    The IP65 SmartShunt kit includes a Temperature Sensor along with Lugs and Heat Shrink for interrupting an existing 4/0 cable.  If these items are not needed, purchase just the IP65 SmartShunt.

    Wiring Diagrams

    Bluetooth Programming Flooded

    Bluetooth Programming AGM

    Bluetooth Programming Lithium Battle Born

    Bluetooth Programming Lithium LifeBlue

    Bluetooth Programming Lithium Victron

    Instructional Video from Victron

  • Installation Conceptualization

    Electrical current always flows in a loop from the positive side of a battery bank through cables, through loads, through more cables and eventually back to the battery bank through the negative side.  Different loads create alternate routes in the loop but they all end up going back to the negative.  In order to determine total current flow (which is used to determine remaining battery capacity and a number of other things) ALL of the current has to pass through the shunt.  The easiest way to ensure that you capture all of the current, and not just some that went on an alternate route, is to install the shunt right before the negative side of the battery bank and make sure that all alternate route cables connect on one side of the shunt and the battery negative goes to the other side.
  • How a shunt work

    When current flows through a load the voltage is reduced.  This reduction is proportional to the amount of current passing through that load.  A shunt is like a very low power load.  There is a slight voltage drop between the terminals of the shunt.  This voltage drop is measured and translated by a microprocessor to determine current.

  • What you get:


    SmartShunt 500A/50mV IP65

    1x  TEMP-VTBMV Victron

    Temperature sensor for BMV-700 series

    2x   LUG-4/0-RING-3/8

    4/0 Lug-3/8″ Ring

    3” HS-BLK-HD-3/4

    Heat Shrink 3/4″ Black (1.5″ pieces)

    2x  FSTSCW-1034SS

    Screw-#10×3/4″ PHP SMS SS

    2x  SPLICE-18-BUTT-HS

    18-22 ga. Butt-HS

    6” HS-BLK-DWALL-1/2


What our customers are saying

There are no reviews for this product yet. You can be first.

The am solar way

  • Treat customers right

  • Treat each other right

  • have fun

  • build a strong business