“Z” Bigfoot Mount Set for Zamp Panels

This mount set is designed for use with our AMS Essential kits or Zamp Solar panels. This mount set will not allow tilting. Made of corrosion resistant stainless steel.

AM Solar Part Number:  91M-ZBZ

1. Clean the surface you are mounting on with 91% isopropyl alcohol.
2. Set the panel with mounts on the roof and position.
3. Lift the panel and peel the tape cover off of each mount foot.
4. Place the sticky panel back on the roof in the same exact position.
5. Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
6. Apply the sealant by completely burying the mount foot.

Extension Beyond Panel Edge (per side)
Rocker Mounts
91M-35MA
1-1/4”

”Z” Bigfoot Mount Set
91M-35MA
0”, 1-1/8”

Elevation Above Surface
Rocker Mounts
L Foot – 3 Hole (Standard)
MOUNTTL-3
1-1/8”, 1-1/2”, 1-7/8”

L Foot – 5 Hole
MOUNTTL-5
1-1/8”, 1-1/2”, 1-7/8”, 2-1/4”, 2-5/8”

L Foot – Tall 3 Hole
MOUNTTL-T3
3”, 3-3/8”, 3-3/4”

”Z” Bigfoot Mount Set
91M-35MA
1-1/2”