Itasca

4/12/2017 - 2016 Itasca Navion 24J, 24'

This client needed a small solar charging system for DC loads and battery maintenance with a battery monitor to help them regulate energy consumption.  What they got was a solar panel kit consisting of two of our SF100 solar panels connected in parallel with our roof mount combiner box.  To reduce DC line losses, heavy 6ga wire was routed from the combiner box to the MPPT charge controller and then to the battery bank.  Between the most negative battery and all negative connections, we installed a shunt to measure current.  The shunt and the charge controller communicate with the Blue Sky IPN Pro monitor to give full system status with Amp-hour precision.

Equipment added:  2x SF100 Solar Panel Kits 1x SunRunner Signature MPPT 25A System Core 1x Roof C-Box 1x Tilt Bar Set 15.5"

Equipment added:
2x SF100 Solar Panel Kits
1x SunRunner Signature MPPT 25A System Core
1x Roof C-Box
1x Tilt Bar Set 15.5"

200W Solar Kit

200W Solar Kit

Blue Sky 2512iX HV Charge Controller

Blue Sky 2512iX HV Charge Controller

Blue Sky IPN Pro Remote

Blue Sky IPN Pro Remote

7/1/2016 - 2016 Itasca Navion 24G, 24'

When air conditioning is important, you better go big with your battery capacity.  This customer got an 800Ah Victron Signature lithium system will full cold weather charging disconnects.  The Victron 3000VA inverter/charger can draw from shore power or a generator at the same time as it draws from the battery bank to power large loads like air conditioners.

Before Lithium

Before Lithium

During Installation

During Installation

800Ah Victron Lithium System

800Ah Victron Lithium System