Full-Timing Bus 860W 200A 600AhLi 3000VA

Skoolie Signature.png
Skoolie Signature.png

Full-Timing Bus 860W 200A 600AhLi 3000VA

14,950.00

- 4x 170W Solar Panels with mounts and wire harnesses
- 2x 90W Solar Panels with mounts and wire harnesses
- 85A Victron SmartSolar MPPT Charge Controller with Bluetooth Communication
- Victron BMV-712 Battery Monitor with Bluetooth Communication
- 600Ah Lithium System with AMS V4 Victron battery protections
- Integrated alternator charging with manual boost
- 3000VA Victron Multiplus pure sine inverter / 120A charger with hybrid 30A shore power
- Sub panel with multiple breakers and AC outlet
- 100A DC Battery Protect with remote disconnect prevents over discharge
- 6 position DC fuse block with DC outlet offering dual USB and standard 12V
- Shore power cord, inlet, lugs, heat shrink, cables, etc. All included

Quantity:
Add To Cart

This deluxe power system charges a state of the art lithium battery system with three different sources:  solar, alternator, and shore power.  All charging and discharging systems are automatically regulated to optimize battery performance.  This system can power nearly all the comforts of home, from a residential refrigerator to even an air conditioner for short periods of time.

What you get:

  • All the components needed to make a complete system
  • Installation manual with a full bill of materials
  • Connection diagrams detailing the entire system
  • AM Solar phone, email and Facetime support

Upgrade or Modification Options:

This complete kit is composed of five subsystems:  Solar Charging, Battery Bank/Monitoring, Alternator Charging, AC Input/Output & DC Distribution.  These subsystems can be removed or modified based on what you already have or want.

Solar

Changing the Panels:  The charge controller can support a maximum of 1150W, so 290W of solar panels with a similar Vmpp can be added.  The easiest add-ons will be more 90W and 170W panels.  The current kit uses 4x 170W panels and 2x 90W panel but quantities of these can be changed.  You can also connect panels in series-parallel configurations or even use larger commercial solar panels as long as you reinforce the mounts and only parallel panels of a similar Vmpp.

Change the Charge Controller:  The current charge controller core is rated for 85A and uses 2ga cable.  If you plan to use less solar wattage, smaller cores like 15A, 30A or 50A might be more economical.  Or, if you want more than 1150W, check out our 100A charge controller core.

External Port:  An external charging port can be added that would allow for the use of folding panels as long as the charge controller can handle the extra wattage.

Battery Bank

AGM Batteries:  The standard configuration of this kit comes with Lithium Batteries, but it will work with AGM batteries.  Check out our various Lifeline AGM battery options 6V 220Ah, 6V 300Ah, 6V 400Ah and 12V 255Ah.  All batteries need to be the same make, model and age.

Different Lithium Batteries:  The standard configuration includes two 300Ah batteries.  You can add two more 300Ah batteries or use smaller batteries like the 60Ah, 90Ah, 160Ah, or 200Ah.  The Lithium Base Kit can support up to four batteries as long as they are all the same amp-hour rating.

AC and DC Distribution

More DC Outlets:  The standard configuration comes with a 6 position fuse block.  We have a 12 position block available.  You can also get more outlets.

More AC Outlets:  We include one AC outlet.  If you need more, you can add them to the same breaker or other breakers in the sub panel.

Different Breakers:  The standard configuration includes three duplex breakers 30/15, 20/15 & 15/15.  There are many options.

Inverter/Charger System

Simplify the Inverter:  If you don’t need the full 3000VA or a charger, you may be interested in one of our smaller stand alone inverter kits like the 250VA, 500VA, 800VA, or 1200VA.  With these kits you also have the option of adding a shore power charger like a Progressive Dynamics 45A or 60A model or a clip on 7A charger.  Also, the Multiplus 2000VA has a slightly different profile and is still capable of running a microwave, blender or coffee maker, but we don't recommend it for air conditioners.
 

Monitoring

Upgrade the Display:  Add a wall mounted MPPT Control to monitor the charge controller or a Victron Color Control GX Monitor to show complete system status on a single animated display.

Plan your build with these components:

ZS170 Solar Panel Kit with Rocker Mounts

Using 6" monocrystalline cells, this panel is ideal for large systems where there is ample roof space.  Made in Bend, Oregon, United States Flash tested at 184W +/- 3%

Wattage:  170W
Type:  Monocrystalline
Operating Voltage:  18.00V
Size:  58.3" x 26.4" x 1.38"
Frame:  Silver Anodized Aluminum
Connection Type:  Terminal Block
Mount:  Tilting (with optional tilt bars)
Mounted Dimensions:  60.6" x 26.4" x 2.6"

Zamp ZS90 90W Solar Panel

This panel is manufactured in Bend, Oregon to the highest quality standards.  It is ideal for tight spaces.
Wattage:  90W
Type:  Monocrystalline
Operating Voltage: 19.1Vmpp
Size:  58.3" x 13.5" x 1.38"  14.3lbs
Frame:  Channeled Silver Anodized Aluminum
Connection Type:  Zamp
Mounted Dimensions:  60.6" x 13.5" x 2.6"

Roof C-Box

This C-box is for efficiently combining solar panel output cables and sealing off a roof penetration. Its rugged and spacious design make installation and trouble shooting very easy.

Dimensions: H 1.9" x W 5.3" x D 7.4"

SmartSolar MPPT 150/85-Tr (12/24/36/48V-85A) Charge Controller

Using the latest, fastest technology, SmartSolar charge controllers maximize energy-harvest by driving current intelligently to achieve a full charge in the shortest possible time. SmartSolar charge controllers offer easy programing of charging profiles to match all battery chemistries using the VictronConnect Bluetooth app.

Type: 
 MPPT
Current Rating:  85A
Maximum Wattage:  1150W
Temp Sense:  Ambient
Display:  MPPT Control, Color Control, Built-in BlueTooth, Pluggable Display
Programming:  Preset Options
Dimensions: H 3.8" x W 11.6" x D 8.1"

DC Breakers

Because of Direct Current's tendency to arc when disconnected, special breakers are needed.  These DC breakers are ideally used between charge controllers and battery banks and on alternator or small inverter lines.

Dimensions: H 1.8" x W 2.3" x D 3.5"

High Current On/Off Switch

Manually disconnect high current lines.  This switch is typically used between a combiner box and a charge controller, or between a battery bank and an inverter.

Dimensions: H 3.4" x W 2.9" x D 2.9"

Victron BMV-712 Battery Monitor Kit

Battery monitor kit with programmable relay.  Measures voltage, current, capacity, and temperature.  Can work with any battery type.  Built-in Bluetooth.  Compatible with the Color Control Monitor.

Monitor Dimensions:  H 1.3" x W 2.4" x D 2.4"
Shunt Dimensions:  H 1.4" x W 4.8" x D 1.6"

Lynx Distributor Battery Combiner

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.  Fuses sold separately. 

Dimensions: H 3.0" x W 11.3" x D 6.9"

Battery Protect 12V/24V-100A

Protect your batteries from accidental excessive discharge by installing a BP100 between your battery positive and DC distribution buss or fuse box.  For loads under 100A.

Dimensions: H 2.5” x W 6.4” x D 1.7”

LiFePO4 Battery 12.8V/300Ah - BMS Smart

Includes integrated cell balancing, Bluetooth communication and an internal BMS.  Batteries can be parallel connected to increase amp hour capacity.

Weight: 112.4lbs
Dimensions: H 13.6" x W 16.7" x D 10.4"  

MultiPlus 12/3000/120-50 120V VE.Bus Inverter/Charger

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Rated at 3000VA.

Dimensions: H 8.8" x W 10.2" x D 14.4"

Digital Multi Control 200/200A

This panel is intended both for Multiplus and Quattro inverter'/chargers. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example.

Dimensions: H 1.7" x W 4.7" x D 2.6"

AMS Lithium Control Board

The V4 Lithium Control Board regulates all charging and discharging sources of lithium batteries based on cell temperature and voltage to ensure optimum system performance.

Dimensions:
H 0.9" x W 4.1" x D 2.1"

Class T Fuse & Holder

Class T Fuses are used as circuit protection between battery banks and inverters or alternators.

Dimensions: H 2.4" x W 7.1" x D 2.0"

Sub Panel Surface Mount

Breaker box for AC distribution, Rated for 40A

Dimensions: H 3.4" x W 5.0" x D 8.6"

Midnite Solar Baby DIN Mount Box

AC Distribution panel for 30A shore power systems

Dimensions: H 2.6" x W 3.0" x D 6.9"

EV200 Relay

12/24V high current relay

Current Rating:
200A
Dimensions: 
 H 2.8" x W 3.2" x D 2.4"

 
 
 
 

AM Solar Part Number:  99-SKOSIG