Roof Cable Management
Best Sellers
These are our most popular roof cable management items.
-
AM Solar Roof Combiner Box (C-Box)
A mobile solar combiner box is what houses cable connections from individual solar panels or strings of solar panels. It also covers the roof penetration where conductors are fed down to the solar charge controller. This is the culmination of 15 years of...
-
Zamp Roof Combiner Box (C-Box)
For small to medium-sized solar-charging systems: UV resistant, low profile, will accommodate a number of connection styles* 5 1/4" W x 4 5/8" D x 1 7/8" H Up to 6GA output cable Up to 4 inputs 2 ATP input plugs 2 knockouts...
-
Zamp ATP Prep Kit - Female
This kit allows Zamp panels with ATP connectors to splice onto 10ga cable.
-
Roof Wire Transition Kits
These transition kits contain all the hardware needed to manage your rooftop wire runs from one plug type at the solar modules, to another at the Combiner Box or series pair. These kits do not come with UV protected 10/2 wire. That wire...
-
Zamp 2 Pole Plug, ATP 2 to 1 Parallel
Zamp two to one ATP parallel combiner cable adapter specifically designed for the Zamp DJ190 panel. AM Solar Part Number: PLUG-ATP-2-1-PARLEL
-
Zamp 2 Pole Plug, ATP 2 to 1 Series
Zamp two to one ATP series combiner cable adapter specifically designed for the Zamp DJ190 panel. AM Solar Part Number: PLUG-ATP-2-1-SERIES
-
Zamp 2 Pole Plug, ATP 2 to 1 Series Long
Zamp two to one ATP series combiner cable adapter specifically designed to series connect to ATP style panels AM Solar Part Number: PLUG-ATP-2-1-LNGSER
Combiner and Roof Penetration Options
A combiner box houses the parallel connections that are necessary when multiple solar panels are used in a system. A combiner box also provides an easy access point for future panel additions and is typically located near or over the roof penetration. The weather tight strain reliefs used in the connections to the combiner boxes come with the SunRunner Panel Kits or can be purchased separately. With just one or two panels it may make sense to use MC4 connectors and a clamshell to cover the roof penetration.
-
AM Solar Roof Combiner Box (C-Box)
A mobile solar combiner box is what houses cable connections from individual solar panels or strings of solar panels. It also covers the roof penetration where conductors are fed down to the solar charge controller. This is the culmination of 15 years of...
-
MC-4 Comparable T-Branch Connectors
This connector set combines the MC-4 type cable outputs of two solar panels in parallel.mc
-
Cable Gland, 2.5” Round, Grey
A waterproof (IPX6 & IPX7 rating) cable routing device with a UV stable Glass Filled ABS plastic housing. Common applications for this cable gland are to accommodate one of our 10/2 duplex roof cables, or 2 x 10GA PV cables, or 2 x...
-
Clamshell Roof Penetration Cover
The clamshell is used on Essential kits to cover a roof penetration when not using a standard combiner box.
-
Roof Wire Transition Kits
These transition kits contain all the hardware needed to manage your rooftop wire runs from one plug type at the solar modules, to another at the Combiner Box or series pair. These kits do not come with UV protected 10/2 wire. That wire...
-
Zamp 2 Pole Plug, PV 2 to 1
Zamp two to one combiner cable adapter. This is a parallel connector (amperage increases, voltage maintains). AM Solar Part Number: PLUG-2POLEFLAT-2-1
-
Zamp Roof Combiner Box (C-Box)
For small to medium-sized solar-charging systems: UV resistant, low profile, will accommodate a number of connection styles* 5 1/4" W x 4 5/8" D x 1 7/8" H Up to 6GA output cable Up to 4 inputs 2 ATP input plugs 2 knockouts...
External Receptacles
External Receptacles are ideal for single panel or portable panel systems where the panel isn’t permanently attached.
-
Zamp 2 Pole Plug, Roof/Wall
Ideal for adding a mobile panel. This port attached to the external wall or roof of an RV and is compatible with Zamp connectors. AM Solar Part Number: PLUG-2PF-RW
-
Zamp 2 Pole Plug, Battery Side
Splice this connector onto the battery side of factory pre-wire leads or the AM Solar roof cable. The connector is compatible with Zamp equipment. AM Solar Part Number: PLUG-2POLEFLAT-BATTSIDE, PLUG-2PF-B
-
Wall Mount Receptacle for Portable Panels (Male) 8ga.
The heavy duty design and locking connection make this receptacle ideal for mounting to the outside of a vehicle for connecting to a portable panel system. Only mates with Extension Cord Plug for Panel (Female) AM Solar Part Number: PLUG-PRTBL-BATT-8GA
-
Zamp Bracketed Solar Port (SAE)
Zamp’s bracketed SAE solar port is weather resistant and designed to be mounted on a towbar or bumper. Connect it to your battery with the included inline fuse and 12 AWG wire with ring terminals. This port is compatible with any Zamp Solar...
Panel Cable Plugs
Panel Cable Plugs are ideal for portable panels or panels that aren’t permanently mounted.
-
Zamp 2 Pole Plug, PV Side
Splice this connector onto solar panel leads or the AM Solar roof cable. The connector is compatible with Zamp pre-wire systems. AM Solar Part Number: PLUG-2POLEFLAT-PVSIDE
-
Zamp 15' Extension w/ 2 Pole plugs
15' extension cable for use with Zamp panels AM Solar Part Number: CABLE-10GA-2-15EXTNSN
-
Extension Cord Plug for Panel (Female) 8ga.
The heavy duty design and locking connection make this plug ideal for splicing onto the leads of a portable panel system. Only mates with Wall Mount Receptacle for Portable Panels (Male) AM Solar Part Number: PLUG-PRTBL-PANEL-8GA
Strain Reliefs
Strain reliefs allow cables to enter or exit the combiner box while preserving a weathertight seal. Strain reliefs can be used for the standard 10/2 roof cable, MC4 solar cable or system core cable exiting the combiner box and going down a vent.
-
Roof Wire Harness Acc. Kit
This kit contains all the hardware needed to manage a 10/2 solar panel cable and connect it into a combiner box. AM Solar Part Number: 92C-ROOF
-
Liquid Tight Strain Relief for 10/2 cable
This part enables a liquid tight seal for our custom 10/2 roof cable entering a combiner box or a single conductor exiting a combiner box. Can also be used for 2ga output cables. Cable Range of .230"-.546" AM Solar Part Number: STRN-1/2LN
-
Liquid Tight Strain Relief 1/2" for 2 PV wires
This part enables a liquid tight seal for the positive and negative leads of 10ga. PV wire entering our combiner box from the solar panel. The weather tight gland has 2 holes which will accommodate wire from .25-.27" in diameter. AM Solar Part...