Cables Conduit & Adapters

Battery & Inverter Interconnect

  • Heavy Gauge Cable

    Cable-4/0

    Typically used between the battery bank and a 2000W or larger inverter Sold by the foot

    Quantity:
    $9.00

  • Cable-2/0

    Typically used between batteries or between a battery bank and a 2000W inverter. Sold by the foot AM Solar Part Number:  CABLE-2/0-1-BLK

    Quantity:
    $6.00
  • Battery Bank Wiring Cable Kits

    Battery Bank Wiring Cable Kits

    For helpful advice on the differences between Parallel & Series connection and which might be best for you and your project, please see our wiki article here. Cable, Lugs, and Heat Shrink needed to connect two batteries in parallel or series, depending on...

    Quantity:
    from: $25.00
  • Junction Post Kit Negative with Cable

    Junction Post Kit Negative with Cable

    When using 4 or more subsystems, there are quite a few negative connections that need to be added to the shunt. By adding the Junction Post Kit Negative w/Cable, you can connect all the negatives a little easier. This does not come assembled....

    Quantity:
    $25.00
  • Junction Post Kit Positive with Cable

    Junction Post Kit Positive with Cable

    This kit does not come assembled.

    Quantity:
    $25.00

Roof C-Box to Charge Controller

  • Duplex-2/2

    Typically used between a combiner box and a charge controller in 70A (or 900W) or larger systems. Sold by the foot AM Solar Part Number:  CABLE-2GA-2-GRY8

    Quantity:
    $8.00

  • Duplex-4/2

    Typically used between a combiner box and a charge controller in 40A-60A (or 600W-800W) systems Sold by the foot AM Solar Part Number:  CABLE-4GA-2-GRY5

    Quantity:
    $5.00

  • Duplex-6/2

    Typically used between a combiner box and a charge controller in 25A-35A (or 300W-500W) systems Sold by the foot AM Solar Part Number:  CABLE-6GA-2-GRY

    Quantity:
    $3.50

  • Duplex-8/2

    Typically used between a combiner box and a charge controller in 30A (or 400W) or smaller systems Sold by the foot AM Solar Part Number:  CABLE-8GA-2-R&B, CABLE-8GA-2-GRY

    Quantity:
    $3.00
  • Duplex-10/2 600V Cable

    Duplex-10/2 600V Cable

    Typically used between series connected solar panels and a charge controller. AM Solar Part Number:  CABLE-10GA-2-WHT

    Quantity:
    $2.00
  • Romex-14-2

    Romex-14-2

    Typically used between sub-panels and small AC loads. Sold by the foot AM Solar Part Number:  CABLE-14GA-2-WHT

    Quantity:
    $1.25

Roof & Solar Panel

  • Roof Wire - AMS Custom 10ga Duplex

    Custom designed for AM Solar with a UV resistant jacket and a round profile that creates a tight seal through a liquid tight strain relief, this cable goes from solar panels to the combiner box. Price is per foot.

    Quantity:
    $3.00
  • 10ga PV Black Wire

    10ga PV Black Wire

    Used to make MC-4 extension cable from solar panels to a combiner box or charge controller.  Sunlight & moisture resistant, flexible (19 copper strands), .265” diameter. Sold as black wire by the foot. AM Solar Part Number:  CABLE-10GA-PV1-BLK

    Quantity:
    $0.80

Communication

  • Direct Cable CABLE-VT-D

    VE.Direct Cable

    VE.Direct cables come in a variety of lengths and are used to connect various Victron devices to monitors or remotes. AM Solar Part Number:  CABLE-VT-D-0.3, CABLE-VT-D-0.9, CABLE-VT-D-1.8, CABLE-VT-D-3, CABLE-VT-D-5, CABLE-VT-D-10, CABLE-VT-D-0.3R, CABLE-VT-D-0.9R, CABLE-VT-D-1.8R, CABLE-VT-D-10R

    Quantity:
    from: $13.60
  • RJ45 Cable

    RJ45 Cable

    RJ45 cables come in a variety of lengths and are used to connect various Victron devices to monitors or remotes. AM Solar Part Number: CABLE-VT-RJ45-0.3, CABLE-VT-RJ45-0.9, CABLE-VT-RJ45-1.8, CABLE-VT-RJ45-3, CABLE-VT-RJ45-5, CABLE-VT-RJ45-10, CABLE-VT-RJ45-15, RJ45, RJ45, RJ-45

    Quantity:
    from: $7.50
  • M8 Lithium Battery Extension Cable

    M8 Lithium Battery Extension Cable

    Every Victron lithium battery has a male and a female M8 cable.  These cables connect batteries together in a series chain with the ends going to the VE.Bus BMS.  If components aren’t close enough for the standard battery cables these extensions can be...

    Quantity:
    from: $15.00
  • Duplex-18/2

    Duplex-18/2

    Typically used as signal wire between a shunt and monitor. Sold by the foot AM Solar Part Number:  CABLE-18GA-2-GRY

    Quantity:
    $0.60

Inverter/SPS Cable

  • Stranded-6-4

    Stranded-6/4

    Typically used between the SPS and the main panel in systems designed for a 50A service Sold by the foot AM Solar Part Number:  CABLE-6GA-4-GRY

    Quantity:
    $9.50
  • Stranded-6/3

    Stranded-6/3

    Typically used between main or sub-panels and an inverter, or between the inverter and the SPS in systems designed for a 50A service Sold by the foot AM Solar Part Number:  CABLE-10GA-3-GRY

    Quantity:
    $4.25

  • Stranded-10/3

    Typically used between main or sub panels and an inverter in systems designed for 30A service AM Solar Part Number:  CABLE-10GA-3-GRY

    Quantity:
    $3.50

Conduit

  • Split Loom Conduit Tubing

    Split Loom Conduit Tubing

    Protect cables from abrasion by covering them in split loom. Sold by the foot AM Solar Part Number:  SPLM-1/8, SPLM-1/4, SPLM-3/8, SPLM-1/2, SPLM-5/8, SPLM-3/4, SPLM-7/8, SPLM-1

    Quantity:
    from: $0.25

Victron Adapters

  • Victron MK3-USB Interface

    Allows for programming of an inverter using a PC.

    Quantity:
    $72.25
  • VE.Direct to USB interface Cable

    VE.Direct to USB interface Cable

    The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX. Visit the Victron webpage ASS030530000

    Quantity:
    $28.05
  • VE.Direct non-inverting remote on-off cable

    VE.Direct non-inverting remote on-off cable

    This cable is used to interface a Victron SmartSolar MPPT charge controller with a Victron lithium system BMS. It is not recommended for charge controllers with a CD port or systems where a Color Control GX, Venus GX, or Cerbo GX monitor will...

    Quantity:
    $20.00
  • VE.Bus to VE.Can interface

    VE.Bus to VE.Can interface

    This interface is used in Hub-1 systems with grid-feedback enabled. It interfaces between the VE.Bus system and one or more MPPT solar chargers with a VE.Can connection: the MPPT 150/70 and/or MPPT 150/85. Visit the Victron webpage ASS030520105 AM Solar Part Number:  CABLE-VT-VECAN

    Quantity:
    $260.00