Tiny Home 1360W 800AhAGM 2000VA
Tiny Home 1360W 800AhAGM 2000VA
- 8x 170W Solar Panels with mounts and wire harnesses
- Mounts for asphalt shingle roof included
- 100A Victron SmartSolar MPPT Charge Controller with Bluetooth Communication
- Victron BMV-712 Battery Monitor with Bluetooth Communication
- 4x Lifeline 400Ah AGM 6V Batteries
- 2000W Victron Multiplus pure sine inverter / 80A charger with hybrid 30A generator connection
- 60A DC Battery Protect with remote disconnect prevents over discharge
- 6 position DC fuse block with DC outlet offering dual USB and standard 12V
- Lugs, heat shrink, cables, etc. All included
This power system includes all the critical components to power an off-grid lifestyle. Two different charging sources (solar and generator) can charge a sealed AGM battery bank. This system can easily power LEDs, fans and cell phone chargers with DC, and on the AC side, generator power can go directly to the outlets when in use or power can be inverted from the battery bank to cover loads like a blender, microwave or coffee pot. (gas generator not included)
What you get:
- All the components needed to make a complete system
- Installation manual with a full bill of materials
- Connection diagrams detailing the entire system
- AM Solar phone, email and Facetime support
Upgrade or Modification Options:
This complete kit is composed of four subsystems: Solar Charging, Battery Bank/Monitoring, AC Input/Output & DC Distribution. These subsystems can be removed or modified based on what you already have or want.
Changing the Panels: The charge controller can support a maximum of 1400W, so only 40W of panels can be added. But, you may consider removing one or all of your 170W panels and adding other panels with a total wattage of 1400W or less.
Change the Charge Controller: The current charge controller core is rated for 100A and uses 2ga cable. If you plan to use less solar wattage, a smaller core like the 15A, 30A or 50A might be more economical. Or, if you want more than 1400W, you can add another charge controller with a parallel array.
External Port: A charging port can be added that would allow for the use of folding panels as long as the charge controller can handle the extra wattage.
Different AGM Batteries: The standard configuration comes with four 6V 400Ah AGM batteries. If you want more energy storage you could add another pair of 6V 400Ah batteries, or go smaller with 220Ah or 300Ah. All batteries need to be the same make, model, and age.
Lithium Batteries: If space constraints are more restrictive than budget constraints, you can add up to four Lithium Battery Add-on kits to the Lithium Base Kit as long as all the kits have the same amp-hour rating.
AC and DC Distribution
More DC Outlets: The standard configuration comes with a 6 position fuse block. We have a 12 position block available. You can also get more outlets.
More AC Outlets: We include one AC outlet. If you need more, you can add them to the same breaker or other breakers in the sub panel.
Different Breakers: The standard configuration includes three duplex breakers 30/15, 20/15 & 15/15. There are many options.
Simplify the Inverter: If you don’t need the full 2000VA or a charger, you may be interested in one of our smaller stand alone inverter kits like the 250VA, 500VA, 800VA, or 1200VA. With these kits you also have the option of adding a shore power charger like a Progressive Dynamics 45A or 60A model or a clip on 7A charger.
Upgrade the Inverter: There is only a marginal price difference between the 2000VA and the 3000VA inverter systems. The 3000VA has a different footprint that might be better suited to some installation.
Upgrade the Display: Add a wall mounted MPPT Control to monitor the charge controller or a Victron Color Control GX Monitor to show complete system status on a single animated display.
Plan your build with these components:
Using 6" monocrystalline cells, this panel is ideal for large systems where there is ample roof space. Made in Bend, Oregon, United States Flash tested at 184W +/- 3%
Operating Voltage: 18.00V
Size: 58.3" x 26.4" x 1.38"
Frame: Silver Anodized Aluminum
Connection Type: Terminal Block
Mount: Tilting (with optional tilt bars)
Mounted Dimensions: 60.6" x 26.4" x 2.6"
This C-box is for efficiently combining solar panel output cables and sealing off a roof penetration. Its rugged and spacious design make installation and trouble shooting very easy.
Dimensions: H 1.9" x W 5.3" x D 7.4"
Using the latest, fastest technology, SmartSolar charge controllers maximize energy-harvest by driving current intelligently to achieve a full charge in the shortest possible time. SmartSolar charge controllers offer easy programing of charging profiles to match all battery chemistries using the VictronConnect Bluetooth app.
Current Rating: 100A
Maximum Wattage: 1400W
Temp Sense: Ambient
Display: MPPT Control, Color Control, Built-in BlueTooth, Pluggable Display
Programming: Preset Options
Because of Direct Current's tendency to arc when disconnected, special breakers are needed. These DC breakers are ideally used between charge controllers and battery banks and on alternator or small inverter lines.
Dimensions: H 1.8" x W 2.3" x D 3.5"
The BMV-712 is Victron's newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Compatible with all battery types. Built-in Bluetooth.
Monitor Dimensions: H 1.3" x W 2.4" x D 2.4"
Shunt Dimensions: H 1.4" x W 4.8" x D 1.6"
Protect your batteries from accidental excessive discharge by installing a BP65 between your battery positive and DC distribution buss or fuse box. For loads under 65A.
Dimensions: H 1.9” x W 4.2” x D 1.9”
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Rated at 2000VA.
Dimensions: H 5.0" x W 9.9" x D 20.7"
AM Solar Part Number: 99-TNYGLD