Cables Conduit & Adapters

Battery & Inverter Interconnect
Roof C-Box to Charge Controller
Roof & Solar Panel
Communication
Inverter Input
Conduit


Battery & Inverter Interconnect

Cable-4/0
9.00

Typically used between the battery bank and a 2000W or larger inverter

Sold by the foot

Quantity:
Add To Cart
Cable-2/0
6.00

Typically used between batteries or between a battery bank and a 1000W inverter.

Sold by the foot

Quantity:
Add To Cart
 
 

Roof C-Box to Charge Controller

Duplex-2/2
6.50

Typically used between a combiner box and a charge controller in 40A (or 600W) or larger systems.

Sold by the foot

Quantity:
Add To Cart
Duplex-4/2
5.00

Typically used between a combiner box and a charge controller in 30A-40A (or 400W-600W) systems

Sold by the foot

Quantity:
Add To Cart
Duplex-6/2
3.50

Typically used between a combiner box and a charge controller in 25A-35A (or 300W-500W) systems

Sold by the foot

Quantity:
Add To Cart
Duplex-8/2
2.00

Typically used between a combiner box and a charge controller in 30A (or 400W) or smaller systems

Sold by the foot

Quantity:
Add To Cart
Duplex-10/2 600V Cable
2.00

Typically used between series connected solar panels and a charge controller.

Quantity:
Add To Cart
 
 
 

Roof & Solar Panel

Roof Wire - AMS Custom 10ga Duplex
3.00

Custom designed for AM Solar with a UV resistant jacket and a round profile that creates a tight seal through a liquid tight strain relief, this cable goes from solar panels to the combiner box.

Sold by the foot

Quantity:
Add To Cart
10ga PV Black & White Wire
1.60

Used to make MC4 extension cable from solar panels to a combiner box or charge controller.  Sunlight & moisture resistant, flexible (19 copper strands), .265” diameter.

Sold as two cables (black & white) by the foot

Quantity:
Add To Cart
 
 

Communication

VE.Direct Cable
from 18.00

VE.Direct cables come in a variety of lengths and are used to connect various Victron devices to monitors or remotes.

Length:
Quantity:
Add To Cart
M8 Lithium Battery Extension Cable
from 15.00

Every Victron lithium battery has a male and a female M8 cable.  These cables connect batteries together in a series chain with the ends going to the VE.Bus BMS.  If components aren’t close enough for the standard battery cables these extensions can be used to get more length.  Each cable has a male and a female end.

Length:
Quantity:
Add To Cart
Duplex-18/2
0.60

Typically used a signal wire between a shunt and monitor.

Sold by the foot

Quantity:
Add To Cart
 

Inverter Input

Stranded-10/3
2.50

Typically used between main or sub panels and an inverter in systems designed for 30A service

Sold by the foot

Quantity:
Add To Cart
Stranded-6/3
4.25

Typically used between main or sub panels and an inverter in systems designed for 50A service

Sold by the foot

Quantity:
Add To Cart
 
 

Conduit

Split Loom Conduit Tubing
from 0.25

Protect cables from abrasion by covering them in split loom.

Sold by the foot

Diameter:
Quantity:
Add To Cart
 
 

Victron Adapters

Victron MK3-USB Interface
75.00

Allows for programming of an inverter using a PC.

Quantity:
Add To Cart
VE.Direct to USB interface Cable
30.00

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

Quantity:
Add To Cart
VE.Bus to VE.Can interface
260.00

This interface is used in Hub-1 systems with grid-feedback enabled. It interfaces between the VE.Bus system and one or more MPPT solar chargers with a VE.Can connection: the MPPT 150/70 and/or MPPT 150/85.

Quantity:
Add To Cart