35mm Rocker Foot Mount Set for Zamp Panels


  • Product Description

    For use with the 35mm (1.38″) frame of Zamp Legacy solar panels. Made of corrosion resistant stainless steel.

    AM Solar Rocker Foot Mount Sets are the culmination of decades of RV solar installation experience.  The mounts are designed to attach to the short sides of the solar panels, near the corners to allow for manual tilting.  No penetration is needed when installed on fiberglass or metal roofs thanks to the VHB tape.  When installing on rubber, TPO or any rough surface, the included mounting screws are recommended.  AM Solar was founded in 2002 and has performed thousands of RV solar installations without having a single panel detach from a roof.

    This mount set includes hardware designed specifically to work with Zamp Solar panel frames.

    AM Solar Part Number:  91M-35MZ, 91M-35MZ2t, 91M-35MZ4t, 91M-35MZ5h

  • Mounting Instructions

    1.  Clean the surface you are mounting on with 91% isopropyl alcohol.
    2.  Set the panel with mounts on the roof and position it while the mounts are semi-loose.  This will let everything settle into a natural tension-free position.
    3.  Go around and tighten each Bolt gradually, being careful to keep the L-Foot in the same position.
    4.  Lift the panel and peel the tape cover off of each mount foot.
    5.  Place the sticky panel back on the roof in the same exact position.
    6.  Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
    7.  Apply the sealant by completely burying the mount foot.
    8.  If you have T-Knobs, it is best to check that they are tight before going on a trip.

  • What you get

    4x MOUNTA-35

    Mount Adapter-35mm

    4x MOUNTL-3 L

    Foot-3 Hole

    1x 91M-ZMPBLTKIT

    Zamp Mounting fastener kit

    8x FSTBLT-1412SS

    Bolt-Hex 1/4-20×1/2 SS

    4x FSWASH-SPL-1/4

    Washer-Split 1/4″ SS

    8x FSTSCW-1034SS

    Screw-#10×3/4″ PHP SMS SS

    10″ TAPE-VHB

    3M VHB Tape-4950

  • Mount Dimensions

    Extension Beyond Panel Edge (per side)
    Rocker Mounts

    ”Z” Bigfoot Mount Set
    0”, 1-1/8”

    Elevation Above Surface
    Rocker Mounts
    L Foot – 3 Hole (Standard)
    1-1/8”, 1-1/2”, 1-7/8”

    L Foot – 5 Hole
    1-1/8”, 1-1/2”, 1-7/8”, 2-1/4”, 2-5/8”

    L Foot – Tall 3 Hole
    3”, 3-3/8”, 3-3/4”

    ”Z” Bigfoot Mount Set

What our customers are saying

There are no reviews for this product yet. You can be first.

The am solar way

  • Treat customers right

  • Treat each other right

  • have fun

  • build a strong business