-
Product Description
Elevates solar panels 1-1/8”, 1-1/2”, 1-7/8”, 2-7/8”, 2-5/8”, 3”, 3-3/8” or 3-3/4” above roof surface. Solar panels require at least four L feet. L feet can be used two to a corner to double surface contact area and improve mount strength. Made from corrosion-resistant stainless steel. The base of the L feet is 2.5” x 1”.
AM Solar Part Number: MOUNTL-S3
-
What you get (3 Hole Standard):
1x L-foot 3 hole
2.5″ 3M VHB Tape (attached) -
What you get (5 Hole):
1x L Foot-5 Hole
2.5″ 3M VHB Tape (attached) -
What you get (3 Hole Tall):
1x L Foot-Tall 3 Hole
2.5″ 3M VHB Tape (attached) -
Mounting Instructions:
- Clean the surface you are mounting on with 91% isopropyl alcohol.
- Set the panel with mounts on the roof and position it while the mounts are semi-loose. This will let everything settle into a natural tension-free position.
- Go around and tighten each bolt gradually, being careful to keep the L-Foot in the same position.
- Lift the panel and peel the tape cover off of each mount foot.
- Place the sticky panel back on the roof in the same exact position.
- Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
- Apply the sealant by completely burying the mount foot.
- you have T-Knobs, it is best to check that they are tight before going on a trip.
What our customers are saying
There are no reviews for this product yet. You can be first.
The am solar way
-
Treat customers right
-
Treat each other right
-
have fun
-
build a strong business