Rich Solar 200W Solar Panel

High wattage, using 6″ cells, this panel is ideal for large systems where there is ample roof space.

These modules come in a standard and higher-voltage version*. Please be sure to match your kit and/or module(s) to similar voltage profile modules. Please reach out to AMS support with any clarifying questions by emailing info@amsolar.com

*When maxing out a larger charge controller (>70A) using higher voltage modules can be preferred as it allows you to more incrementally approach the input current max while still adding wattage to the system.

The Rich Solar 200-Watt Monocrystalline PV Solar Panel use high-efficiency solar cells with high module conversion efficiency and long-term output reliability. Virtually maintenance-free. Ideal for RV’s, cabins, sheds, remote locations, and other small power generation needs.

• High transmittance, low-iron tempered glass with enhanced stiffness and impact resistance
• Positive and negative leads equipped with MC4-comparable connectors
• Built-in blocking diodes prevent reverse current flow
• Rigorous quality control to meet the highest international standards, 0% to 3% positive output power tolerance
• Advanced encapsulation material with multi-layer sheet lamination to provide long-life and enhanced cell performance
• Outstanding electrical performance under high temperature and weak light environments
• Unique frame design with strong mechanical strength for up to 50 lbs./sq. ft. wind load and snow load withstanding, mounting holes provided for easy installation
• Secure and worry-free 5-year product warranty and 25-year linear output performance warranty guaranteed, your investment is safe with us

The Rich Solar 200W panel comes in several kit variants. Select the correct kit to match your array voltage and interface with your combiner box.

Parallel: Two separate, shade resilient, parallel-connected panels (ideal for installations next to air conditioners)

Series: A single high-voltage panel (ideal for 24V systems or undersized pre-wires)

200W Raw MC4 20.4Vmp – This is a 20.4Vmp solar panel with factory-installed MC4 style cables and no mounts. This is the standard version voltage version of this module.

200W Raw MC4 37.6Vmp – This is a 37.6Vmp solar panel with factory-installed MC4 style cables and no mounts. Please note this is the higher voltage variety of this module and is not the standard version.

200W Mounts 10/2 20.4Vmp (Parallel Add-on) – This is a 20.4Vmp solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness with MC4 style connectors on one end and a strain relief on the other, along with roof attachment points. This kit is designed to interface with an AM Solar combiner box.

200W Mounts 10/2 20.4Vmp (Series Add-on) – This is a solar panel with AM Solar 35mm Rocker Mounts, and a 10’ 10ga duplex wire harness with MC4 style connectors on both ends, designed to series connect with a 200W Mounts 10/2 Cable 20.4Vmp panel kit.

200W Mounts 10/2 SAE 20.4Vmp – This is a 20.4Vmp solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness with MC4 style connectors on one end and an SAE connector on the other, along with roof attachment points. This kit is designed to interface with a Zamp SAE style combiner box.

200W Mounts 10/2 37.6Vmp (Parallel Add-on) – This is a 37.6Vmp solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness with MC4 style connectors on one end and a strain relief on the other, along with roof attachment points. This kit is designed to interface with an AM Solar combiner box.

RICH 200W 20.4Vmp Spec Sheet

RICH 200W 37.6Vmp Spec Sheet