Zamp 115W Solar Panel

Designed for narrow spaces using 6″ cells, this panel is ideal for small systems. Made in Bend, Oregon, United States.

Zamp uses tempered, low iron, 3.2 mm, AR coated(which stands for anti-reflective) solar glass.

The benefits include:
1. Increased efficiency of the solar panel by 3-5% compared to non-AR coated glass
2. Converts more light into energy at steeper sun angles producing more power in mornings and evenings
3. Easier cleaning as dust and dirt are repelled by this coating rather than trapped with traditional solar glass

The 3.2mm AR coated solar glass is specially designed for the encapsulation material of photovoltaic modules. The coating reduces the directional reflectance and increases the internal reflection so that the solar energy can be absorbed more effectively. It ensures the maximum transmittance of photons to the solar cells, thus increasing the electrical generation capabilities of the module. The glass offers high solar transmittance, low absorbance, low reflectance, superior physical strength and superior flatness.

The Zamp Solar 115W panel comes in several kit variants.  Select the correct kit to interface with your combiner box.
115W Raw SAE – This is a solar panel with factory-installed SAE cable and no mounts.

115W Mounts 10/2 – (Parallel Add-on) – This is a solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness spliced to the factor cable on one end and a strain relief on the other, along with roof attachment points.  This kit is designed to interface with an AM Solar combiner box.

115W Mounts 10/2 – (Series Add-on) – This is a solar panel with AM Solar 35mm Rocker Mounts, and a 10’ 10ga duplex wire harness spliced to the factory cable on one end and spliced in series to a 115W panel kit on the other.  This kit is designed to series connect with a 115W Mounts 10/2 Cable panel kit.

115W Mounts 10/2 ATP – This is a solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness spliced to the factory cable on one end and an ATP connector on the other, along with roof attachment points.  This kit is designed to interface with a Zamp Solar ATP-style combiner box.

Manufacturer’s Certificate

AM Solar Part Number: SOLAR-ZS115, 11-102-ZS115, 11-102-ZS115S, 11-102-ZS115ATP