Zamp 90W Long Solar Panel

Designed for narrow spaces using 6″ cells, this panel is ideal for small systems. Made in Bend, Oregon, United States.

AM Solar Part Number:  SOLAR-ZS90L, 11-102-ZS090L, 11-102-ZS090LS

Zamp uses tempered, low iron, 3.2 mm, AR coated(which stands for anti-reflective) solar glass.

The benefits include:
1. Increased efficiency of the solar panel by 3-5% compared to non-AR coated glass
2. Converts more light into energy at steeper sun angles producing more power in mornings and evenings
3. Easier cleaning as dust and dirt are repelled by this coating rather than trapped with traditional solar glass

The 3.2mm AR coated solar glass is specially designed for the encapsulation material of photovoltaic modules. The coating reduces the directional reflectance and increases the internal reflection so that the solar energy can be absorbed more effectively. It ensures the maximum transmittance of photons to the solar cells, thus increasing the electrical generation capabilities of the module. The glass offers high solar transmittance, low absorbance, low reflectance, superior physical strength, and superior flatness.

Zamp 90W Long Datasheet
Manufacturer’s Certificate

1. Ultra clear textured solar glass (photovoltaic glass) with superior light transmittance
2. High strength glass eliminations unwanted distortions
3. Ultra-white glass decreases the light reflection
4. Thin layer of optoelectronic semiconductor

The Zamp Solar 90W Long panel comes in several kit variants. Select the correct kit to interface with your combiner box.

90W L Raw SAE – This is a solar panel with a factory-installed SAE cable and no mounts.

90W L Mounts 10/2 – (Parallel Add-on)– This is a solar panel with a factory-installed SAE cable, AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness with a splice kit on one end and a strain relief on the other, along with roof attachment points. This kit is designed to interface with an AM Solar combiner box.

90W L Mounts 10/2 – (Series Add-on) – This is a solar panel with a factory-installed SAE cable, AM Solar 35mm Rocker Mounts, and a 10’ 10ga duplex wire harness with splice kits on both ends. This kit is designed to series connect with a 90W L Mounts 10/2 Cable panel kit.

1x SOLAR-ZS90L Solar Panel Z90 Long