– 8x 170W Solar Panels with mounts and wire harnesses
– Mounts for asphalt shingle roof included
– 100A Victron SmartSolar MPPT Charge Controller with Bluetooth Communication
– Victron BMV-712 Battery Monitor with Bluetooth Communication
– 4x Lifeline 400Ah AGM 6V Batteries
– 2000W Victron Multiplus pure sine inverter / 80A charger with hybrid 30A generator connection
– 60A DC Battery Protect with remote disconnect prevents over discharge
– 6 position DC fuse block with DC outlet offering dual USB and standard 12V
– Lugs, heat shrink, cables, etc. All included
This power system includes all the critical components to power an off-grid lifestyle. Two different charging sources (solar and generator) can charge a sealed AGM battery bank. This system can easily power LEDs, fans and cell phone chargers with DC, and on the AC side, generator power can go directly to the outlets when in use or power can be inverted from the battery bank to cover loads like a blender, microwave or coffee pot. (gas generator not included)
What you get:
All the components needed to make a complete system
Installation manual with a full bill of materials
Connection diagrams detailing the entire system
AM Solar phone, email and Facetime support
Upgrade or Modification Options:
This complete kit is composed of four subsystems: Solar Charging, Battery Bank/Monitoring, AC Input/Output & DC Distribution. These subsystems can be removed or modified based on what you already have or want.
Changing the Panels: The charge controller can support a maximum of 1400W, so only 40W of panels can be added. But, you may consider removing one or all of your 170W panels and adding other panels with a total wattage of 1400W or less.
Change the Charge Controller: The current charge controller core is rated for 100A and uses 2ga cable. If you plan to use less solar wattage, a smaller core like the 15A, 30A or 50A might be more economical. Or, if you want more than 1400W, you can add another charge controller with a parallel array.
External Port: A charging port can be added that would allow for the use of folding panels as long as the charge controller can handle the extra wattage.
Different AGM Batteries: The standard configuration comes with four 6V 400Ah AGM batteries. If you want more energy storage you could add another pair of 6V 400Ah batteries, or go smaller with 220Ah or 300Ah. All batteries need to be the same make, model, and age.
Lithium Batteries: If space constraints are more restrictive than budget constraints, you can add up to four Lithium Battery Add-on kits to the Lithium Base Kit as long as all the kits have the same amp-hour rating.
AC and DC Distribution
More DC Outlets: The standard configuration comes with a 6 position fuse block. We have a 12 position block available. You can also get more outlets.
More AC Outlets: We include one AC outlet. If you need more, you can add them to the same breaker or other breakers in the sub panel.
Different Breakers: The standard configuration includes three duplex breakers 30/15, 20/15 & 15/15. There are many options.
Simplify the Inverter: If you don’t need the full 2000VA or a charger, you may be interested in one of our smaller stand alone inverter kits like the 250VA, 500VA, 800VA, or 1200VA. With these kits you also have the option of adding a shore power charger like a Progressive Dynamics 45A or 60A model or a clip on 7A charger.
Upgrade the Inverter: There is only a marginal price difference between the 2000VA and the 3000VA inverter systems. The 3000VA has a different footprint that might be better suited to some installation.
Upgrade the Display: Add a wall mounted MPPT Control to monitor the charge controller or a Victron Color Control GX Monitor to show complete system status on a single animated display.
AM Solar Part Number: 99-TNYGLD
What our customers are saying
There are no reviews for this product yet. You can be first.
The am solar way
Treat customers right
Treat each other right
build a strong business
Only logged in customers who have purchased this product may leave a review.