Weekender 180W 220Ah AGM 800VA 15A

Weekender 180W 220Ah AGM 800VA 15A

Out of stock

  • Product Description

    – 2x 90W Solar Panels with mounts and wire harnesses

    – 15A Victron SmartSolar MPPT Charge Controller with Bluetooth Communication

    – Victron BMV-712 Battery Monitor with Bluetooth Communication

    – 2x Lifeline 220Ah AGM 6V Batteries

    – 800W Victron Phoenix pure sine inverter with AC outlet

    – Lugs, heat shrink, cables, etc. All included

    – $5,900 when installed by AM Solar with an estimated 25 hours of labor

    This power system includes all the critical components to power a mobile lifestyle.  Two different charging sources (solar and shore power) charge a sealed AGM battery bank.  The components are designed to interface with your existing wiring and can easily power LEDs, fans and cell phone chargers.  On the AC side, a small inverter can power a laptop or an entertainment system.

    AM Solar Part Number: 99-TRLESS

  • What you get:

    • All the components needed to make a complete system
    • Installation manual with a full bill of materials
    • Connection diagrams detailing the entire system
    • AM Solar phone, email and Facetime support
  • Upgrade or Modification Options:

    This complete kit is composed of three subsystems:  Solar Charging, Battery Bank/Monitoring, & AC Input/Output.  These subsystems can be removed or modified based on what you already have or want.

  • Solar

    Changing the Panels:  The charge controller can support a maximum of 200W, so you are pretty much maxed out on the controller.  You may consider removing one or both panels and switching to a single 170W panel or another panel rated at 200W or less.

    Change the Charge Controller:  The current charge controller core is rated for 15A and uses 8ga cable.  If you want more than 200W of solar, check out our 30A or 50A charge controller cores using thicker 6ga or 4ga cable.

    External Port:  An external charging port can be added that would allow for the use of folding panels as long as the charge controller can handle the extra wattage.

  • Battery Bank

    Different AGM Batteries:  The standard configuration comes with two 6V 220Ah AGM batteries.  If you want more energy storage you could get a single 12V 255Ah battery, or multiple 255Ah batteries connected in parallel.  You could also add more pairs of 6V 220Ah batteries, or upgrade to 300Ah or 400Ah batteries.  All batteries need to be the same make, model and age.

    Lithium Batteries:  We offer three types of lithium battery systems to meet a wide variety of space limitations, uses and budget constraints.

  • AC Distribution

    More AC Outlets:  The standard inverter has one built-in AC outlet.  If you need more, you can plug in a power strip, or modify an extension cord to a sub panel with breakers and use that to feed additional outlets.

  • Inverter/Charger System

    Add a Charger:  With this kit, you have 15A shore power charging.  It can be reduced to a simple 7A clip-on charger, or apermanently mounted Progressive Dynamics 45A or 60A model with shore power cord an inlet, or upgrade to an inverter/charger all-in-one unit.

    Upgrade the Inverter:  For stand-alone inverters without chargers, we have 800VA and 1200VA models available.  You may also consider the Victron Multiplus 2000VA and 3000VA inverter/charger systems with shore power cord, inlet, main panel, and subpanel.

  • Monitoring

    Upgrade the Display:  Add a wall mounted MPPT Control to monitor the charge controller or a Victron Color Control GX Monitor to show complete system status on a single animated display.


What our customers are saying

There are no reviews for this product yet. You can be first.

The am solar way

  • Treat customers right

  • Treat each other right

  • have fun

  • build a strong business