Zamp 90W Short Solar Panel

Designed for narrow spaces using 6″ cells, this panel is ideal for small systems. Made in Bend, Oregon, United States.

Zamp uses tempered, low iron, 3.2 mm, AR coated(which stands for anti-reflective) solar glass.

The benefits include:
1. Increased efficiency of the solar panel by 3-5% compared to non-AR coated glass
2. Converts more light into energy at steeper sun angles producing more power in mornings and evenings
3. Easier cleaning as dust and dirt are repelled by this coating rather than trapped with traditional solar glass

The 3.2mm AR coated solar glass is specially designed for the encapsulation material of photovoltaic modules. The coating reduces the directional reflectance and increases the internal reflection so that the solar energy can be absorbed more effectively. It ensures the maximum transmittance of photons to the solar cells, thus increasing the electrical generation capabilities of the module. The glass offers high solar transmittance, low absorbance, low reflectance, superior physical strength, and superior flatness.

Zamp 90W Short Datasheet
Manufacturer’s Certificate

Panel Features:
1. Ultra clear textured solar glass (photovoltaic glass) with superior light transmittance
2. High strength glass eliminations unwanted distortions
3. Ultra-white glass decreases the light reflection
4. Thin layer of optoelectronic semiconductor

The Zamp Solar 90W Short panel comes in several kit variants. Select the correct kit to interface with your combiner box.
90W S Raw ATP – This is a solar panel with a factory-installed ATP cable and no mounts.

90W S Mounts ATP – This is a solar panel with a factory-installed ATP cable and AM Solar 35mm Rocker Mounts

90W S Mounts 10/2 – (Parallel Add-on) – This is a solar panel with a factory-installed ATP cable, AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness with an ATP adapter on one end and a strain relief on the other, along with roof attachment points. This kit is designed to interface with an AM Solar combiner box.

90W S Mounts 10/2 – (Series Add-on) – This is a solar panel with a factory-installed ATP cable, AM Solar 35mm Rocker Mounts, and a 10’ 10ga duplex wire harness that splices to another panel. This kit is designed to series connect with a 90W S Mounts 10/2 (Parallel Add-on) panel kit.

AM Solar Part Number:  SOLAR-ZS90S-BLK, 11-ATP-ZS090SB, 11-102-ZS090SB, 11-102-ZS090SBS