"Z" Bigfoot Mount Set for Zamp Panels

91M-ZBZ.png
91M-ZBZ.png

"Z" Bigfoot Mount Set for Zamp Panels

40.00

This mount set is designed for use with our AMS Essential kits or Zamp Solar panels.  This mount set will not allow tilting.  Made of corrosion resistant stainless steel.

Quantity:
Add To Cart

Mounting Instructions:

1.  Clean the surface you are mounting on with 91% isopropyl alcohol.
2.  Set the panel with mounts on the roof and position.
3.  Lift the panel and peel the tape cover off of each mount foot.
4.  Place the sticky panel back on the roof in the same exact position.
5.  Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
6.  Apply the sealant by completely burying the mount foot.

What you get:

4x    MOUNTZ-BF        Z-Bigfoot Mount
1x    FSTSET-ZAMP        Mnt Hardware for Zamp Panels, set of 4
4x   FSWASH-FLT-5/16       Flat Washer 5/8 OD-5/16 ID S
8x    FSTSCW-1034SS        Screw-#10x3/4" PHP SMS SS
10"    TAPE-VHB        3M VHB Tape-4950

Mount Dimensions:

Extension Beyond Panel Edge (per side)
Rocker Mounts
91M-35MA
1-1/4”

”Z” Bigfoot Mount Set
91M-35MA
0”, 1-1/8”

Elevation Above Surface
Rocker Mounts
L Foot - 3 Hole (Standard)
MOUNTTL-3
1-1/8”, 1-1/2”, 1-7/8”

L Foot - 5 Hole
MOUNTTL-5
1-1/8”, 1-1/2”, 1-7/8”, 2-1/4”, 2-5/8”

L Foot - Tall 3 Hole
MOUNTTL-T3
3”, 3-3/8”, 3-3/4”

”Z” Bigfoot Mount Set
91M-35MA
1-1/2”

You may also be interested in:

Dicor Sealant
10.00

Dicor protects the VHB tape from the elements.  Use it to seal around mount feet, cable management hardware and combiner boxes attached to roofs.

Quantity:
Add To Cart
Sikaflex 221 Sealant
12.00

Ideal for Airstream roofs, Sikaflex protects the VHB tape from the elements.  Use it to seal around mount feet, cable management hardware and combiner boxes attached to roofs.  Do not use Sikaflex on TPO roofs.

Color:
Quantity:
Add To Cart
 

AM Solar Part Number:  91M-ZBZ