Categories
Back

Installation Summary

  • 800Ah 12VDC LiFeBlue LiFePO4 Lithium Battery Bank w/Victron Energy IP65 SmartShunt Monitor
  • Alternator Charging /DC Distribution Protection
  • 1140W Zamp Solar Array configured in parallel to a Victron Energy 85A MPPT Charging Core
  • 12VDC/3000VA Victron Energy 1x120V AC Input/Output System w/ Micro Air Easy Start & Cerbo GX/Touch 70 Monitor

 

Want a quote for a similar project? Complete this form.

 

Date of Completion: August 11, 2023

System Details

Solar Wattage: 1140W

Charge Controller: SmartSolar MPPT 150/100-Tr VE.Can (100A) Charge Controller

Inverter System: Victron Multiplus II 1x120V 3000VA Inverter Kit- Full Pass

Battery Type: LiFePO4 LiFeBlue Low Temp 200ah

# of Batteries: 4

Battery Ah Rating: 4x 200Ah

Battery Model: LB12200D-LT

 

LiFeBlue LiFePO4 Lithium Battery Bank w/Victron Energy IP65 SmartShunt Monitor

Upgraded for efficiency! Installed all-new parallel cabling to accommodate the additional batteries, ensuring seamless connectivity and optimal performance. 🔌⚡️ #EfficientUpgrade #EnhancedConnectivity

 

Expanding power capacity! Installed an additional LiFeBlue 200Ah LT battery, complementing the existing 3x 200Ah LT system for enhanced energy storage. 🔋⚡️ #PowerExpansion #EfficientEnergy

 

Innovative monitoring solution! Integrated the Victron IP65 Smart Shunt Kit, capable of measuring voltage, current, capacity, and temperature. With built-in Bluetooth, it offers compatibility with any battery type for comprehensive oversight. 📊⚡️ #SmartMonitoring #EfficientManagement

Alternator Charging /DC Distribution Protection

Enhancing safety and efficiency! Each sub-system has been meticulously relocated through individual protection, ensuring optimized performance and safeguarding against potential risks. 🔒⚡️ #SafetyFirst #EfficientDesign

 

 

Streamlining power management! Alternator charging is now routed through a single 200A Breaker before the final battery connection, ensuring efficient and reliable power distribution. ⚡️🔌 #EfficientCharging #EnhancedSafety

 

1140W Solar Array

pgrade in progress! Removed and replaced the Morningstar system and installed a 190W Zamp Solar panel, seamlessly wired up to the existing solar array for enhanced performance. ☀️🔌 #SolarUpgrade #EfficientEnergy

 

Streamlining the setup! Tidying up the combiner box that houses the wires feeding from the panels to the charge controller, ensuring a clean and efficient wiring configuration. 🔌⚡️ #EfficientSetup #NeatWiring

 

 

Maximizing solar power! A robust 1140W solar panel array seamlessly wired to a complete Victron SmartSolar 150/85 MPPT system core, ensuring optimal energy capture and management. ☀️🔌 #SolarEfficiency #PowerOptimization

 

Victron 3000VA Inverter/120ADC Charger System

Powerful integration! Installed a Victron Energy MultiPlus-II 3kVA in the inverter bay, wired in Full Passthrough configuration to the existing 50A AC distribution system, ensuring seamless energy distribution throughout. ⚡️🔌 #EfficientPower #SeamlessIntegration

 

Upgrading monitoring capabilities! Replaced the Magnum ME-RC50 remote monitor with a Touch 50 monitor, enhancing control and visibility over the system’s performance. 🖥️⚡️ #EfficientMonitoring #EnhancedControl

 

Centralized control hub! Cerbo GX installed in the inverter bay, providing comprehensive monitoring and management of the power system from a single location. 🖥️⚡️ #EfficientControl #CentralizedMonitoring

 

 

Automating power management! Installed a 2-to-3 wire AGS unit to maintain Auto-Gen start, ensuring seamless operation and efficient utilization of power resources. 🔄⚡️ #AutomatedPower #EfficientManagement

 

 

Enhanced efficiency at work! Installed Easy-Starts on both A/C units to assist with surge draw, optimizing performance for smoother operation. ❄️🔌 #EfficientCooling #EnhancedPerformance

 

 

#4300